Topics

The Best Photo Booth Print Paper for High-Quality Prints

The Best Photo Booth Print Paper for High-Quality Prints - Photobooth Décor

If you run a photo booth, paper is one of the few costs you pay at every single event. Your dye-sub printer only takes its own media, sold as a kit with a matching ribbon. This guide is for booth owners: what the media is, which sizes exist, how many prints you get from a roll, how much to pack for a booking, and what I have learned from years of hauling printers to events.

What paper do photo booths use?

Photo booths use dye-sublimation media. A media kit has two parts:

  • A roll of coated paper. The printer pulls from the roll and cuts each print to size.
  • A ribbon. It carries yellow, magenta and cyan dye panels plus a clear overcoat panel. Heat moves the dye from the ribbon into the paper.

The paper and ribbon are sold together. The ribbon sets the count: a kit rated for 400 prints gives you 400 prints, no matter how much colour is in each photo. That makes your cost per print easy to work out. Divide the price of the box by the number of prints in it.

The clear overcoat is the reason booth prints come out dry and can be handed to guests right away. It also protects the photo from fingerprints and splashes.

Can I use regular photo paper?

No. Dye-sub printers only accept the media made for that exact model. A DNP DS620A roll will not fit a DS-RX1HS, and neither will fit a HiTi or a Citizen. Inkjet paper and thermal receipt paper do not work at all. Before you order, match the media to the model number printed on your printer.

Paper sizes and prints per roll

The size is named after the print it makes. 4x6 media is the standard, because one 4x6 sheet can also be cut into two 2x6 strips.

Printer 4x6 prints per roll Other sizes it takes
DNP DS620A 400 5x7, 6x8
DNP DS-RX1HS 700 6x8
DNP QW410 150 4.5x8
Citizen CX-02 400 5x7, 6x8
Mitsubishi CP-D70DW 400 5x7, 6x8
HiTi P525L 500 5x7, 6x8

Most media is sold two rolls to a box, so a box of DS620A 4x6 media is 800 prints and a box for the DS-RX1HS is 1,400. Check the listing for your printer before you buy, because roll counts differ between sellers.

What is photo strip paper?

There is no separate strip paper for most booths. The classic 2x6 photo strip is printed two side by side on a 4x6 sheet, and the printer cuts the sheet down the middle. One 4x6 print becomes two strips, so a 400-print roll gives you 800 strips.

Two things to check:

  • Your printer supports the 2x6 cut. Most current event printers do. Some older models need perforated media that you tear by hand.
  • Your booth software is set to a 2x6 layout with the cut turned on. If it is off, you get two strips on one uncut sheet.

For help picking a layout, see our guide to photo booth print sizes.

Glossy or matte?

On most current dye-sub printers the finish is a setting in the printer driver, not a different paper. The printer changes how it lays down the clear overcoat, so the same roll can print glossy at one event and matte at the next.

  • Glossy gives the strongest colour and contrast. It is what most guests expect from a booth print.
  • Matte cuts glare and hides fingerprints. It suits black and white photos and prints that will go in a guest book.

Some printers also offer luster or fine matte, and some have special media such as metallic or pearl. Those are separate rolls and cost more per print.

How much paper to bring

Work it out from the booking:

  1. Estimate sessions. A busy booth runs about one session every two to three minutes.
  2. Multiply by copies per session. Two strips per session uses one 4x6 sheet. A copy for every guest in a group of four uses two.
  3. Add a margin for reprints and test prints.

A four-hour event at one session every three minutes is about 80 sessions. At one sheet each that is 80 prints, a small part of a roll. With a print for every guest it can pass 200. Check the remaining count in the printer driver before you leave, and carry a spare paper and ribbon kit. Running out during an event is the one paper problem you cannot fix on site.

Storing and handling paper

  • Keep media sealed in its bag until you load it. Dust on the paper or ribbon shows up as specks and lines on prints.
  • Store it cool and dry. Heat and humidity cause jams and colour shifts.
  • If the box has been in a cold vehicle, let it warm to room temperature before opening it. Cold media collects condensation.
  • Handle the roll by its ends and do not touch the ribbon surface.
  • Change paper and ribbon as a set. More on that below.

Always change the paper and the ribbon together

When the ribbon runs out, there is still paper left on the roll. A lot of owners save that leftover paper, thinking they will use it up later. They never do. They just end up with a pile of part rolls.

The extra paper is there on purpose. Every time you load a roll, the printer recalibrates and feeds out four or five blank sheets. The manufacturer puts more paper on the roll than the ribbon can print so that those blank sheets do not eat into your print count. The leftover is not a bonus. It is the allowance.

So when the ribbon is done, take out the paper too and load a fresh kit. Mixing an old roll with a new ribbon only leaves you guessing how many prints you have left in the middle of an event.

Should you take the paper out for transport?

DNP says to remove the paper before you move the printer. In practice a lot of booth owners leave it in, and I am one of them. I have never had a problem. I once dropped an RX1 about four feet off my cart with the paper loaded, and it kept working.

That is my experience, not a recommendation. DNP does not advise it. There is also a cost to doing it by the book: every time you put the roll back in, the printer recalibrates and feeds out those four or five sheets. If you unload and reload for every event, some of the allowance goes to calibration each time.

Where to buy photo booth paper

Buy from an authorized dealer for your printer brand or a large photo retailer. Stick with the manufacturer's own media. Off-brand rolls can cause jams and may affect your warranty. We do not sell paper at Photobooth Décor. We make the part of the photo that sits behind your guests.

The other half of a good print

Paper decides how sharp and durable the print is. The backdrop decides what is in it. A wrinkled or shiny background shows in every strip, however good the media. Our photo booth backdrops are tension fabric that pulls flat on the frame, and the solid colour backdrops print cleanly in both colour and black and white. If you are still putting a kit together, our photo booth equipment guide covers the rest.

Share Facebook Pinterest

Comments

Leave a comment

Comments are checked before they show.

← All articles in Topics