★ Free tool by Photo Booth Decor ★
Photo Booth Power Station Calculator
Find the battery that lasts your whole event. Pick your gear and we'll work out the watt-hours, the outlet power, and which power stations can actually run it.
- Battery size (Wh)
- Outlet power (W)
- Matched power stations
Step 3 · Pick your battery
Power stations that fit your booth
Runtime is for your exact setup. Specs are the maker's published numbers, so check before you buy.
We earn a commission if you buy through these links, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
How we calculate
No black box. Here's the math.
-
1
Energy per device
Printer: full power while printing, standby the rest of the hour. Computer: a blend of idle and peak by how hard it works. Strobe: each flash uses its Ws rating × power setting, and refilling the capacitor is about 80% efficient.
-
2
Losses and margin
We add the inverter's own draw while the AC outlets are on, divide by the usable share of the battery (85% by default), then add a 25% safety buffer for cold venues and older batteries.
-
3
Peak power check
Battery size isn't everything. A DNP DS620A pulls about 390 W while it prints, so a 300 W station will cut out even when it's fully charged. We add up the peak draws and only match stations whose outlets can carry them.
FAQ
Powering a photo booth off the grid
How big a power station do I need for a photo booth?
Most printing booths with a DSLR, a Surface or iPad, and a DNP printer use 60–100 W on average. For a 4-hour event that's roughly 300–400 Wh, so a 500–800 Wh station with an 800 W or larger inverter is a safe pick. Put your own gear into the calculator above to get an exact number.
Why do watts (W) and watt-hours (Wh) both matter?
Watt-hours are how much energy the battery holds, which sets how long it lasts. Watts are how much power its outlets can deliver at once. A dye-sub printer briefly pulls hundreds of watts while it prints, so a station needs enough of both.
Does a strobe flash use a lot of power?
Less than you'd think. A 250 Ws strobe at half power firing twice a minute averages about 5 W. A busy printer and the inverter usually use far more.
Can I charge the power station during the event?
Most stations support pass-through charging. If the venue has an outlet, plugging the station in stretches your runtime. Running everything off the battery keeps cables away from guests, which is why outdoor booths use stations in the first place.
Why does my real runtime differ from the estimate?
Cold weather, battery age, screen brightness and how busy the booth gets all change the result. That's why the recommendation includes a safety buffer. Running out early costs far more than buying a slightly bigger battery.