Backdrop stand feet
Heavy duty feet V1
A pair of oversized welded base plates for our V1 frame
Heavy duty feet V1, pair
These feet only fit our V1 frame. They do not fit the V2 frame.
Free shipping on orders of $100 or more
- Sold as a pair.
- About 64 mm (2.5 in) wider than standard feet.
- Outdoors or on a slick floor, add sandbags or weights to each foot.
- 450 × 120 mmPlate size, 5.2 mm thick
- 1.68 kgPer pair, about 3.7 lb
- 55 mmPin height, welded in
- 2 feetSold as a pair
Details
Heavy Duty Oversize Welded Backdrop Stand Base Feet (Pair)
These are the base feet you want when wobble is not an option. This pair has welded-in pins and oversized plates, so it stays stable at busy events, indoors or out, especially when guests lean on your backdrop.
Why You'll Like Them
- Welded-in pins for strength that bolt-on pins can't match.
- Oversized footprint resists rocking and tipping in high-traffic areas.
- Heavier than standard bases for a steady, planted setup.
- Event-proof design originally built for outdoor use.
Best For
- Outdoor activations & windy sites (use sandbags/weights as needed)
- Weddings, galas, corporate step-and-repeats
- Any backdrop guests are likely to lean on
Specifications
| What's included | 2× heavy-duty base feet (pair) |
| Plate size | 120 × 450 × 5.2 mm (≈ 4.72" × 17.72" × 0.205") |
| Pole | 9.3 cm (93 mm) tall, welded to the plate |
| Pin height | 5.5 cm (55 mm) up from the base |
| Weight | ≈ 1.68 kg per pair (≈ 3.70 lb), ~0.84 kg (1.85 lb) each |
| Form factor | Oversized base, about 64 mm wider and >0.45 kg heavier (≈ 2.5" wider, >1 lb heavier) than standard bases |
Compatibility (Important)
These feet only fit our V1 frame. They do not fit the V2 frame, whose feet have a shorter 6 cm pole with the pin at 4.3 cm. Because manufacturers don't follow a universal standard, our welded pin may not fit other systems either.
💡 Pro Tips
- Outdoors or on slick floors? Add sandbags/weights to each base for extra security.
- Keep high-traffic areas clear of cables; tape cords near bases to prevent trips.
- If mixing with a non-GoBooth frame, test the pin fit before event day.
Questions
Which frame do these fit?
Only the Photo Booth Decor V1 frame. They do not fit the V2 frame. If you are not sure which frame you have, contact us before you order.
Will they fit a frame from another maker?
They may not. The pin has to match the upright of the frame, and makers do not follow one standard. Test the fit before your event.
How many feet do I get?
Two. They are sold as a pair, which is what one frame needs.
Can I use them outdoors?
Yes. Outdoors or on a slick floor, add sandbags or weights to each foot.